Allow approximately 6 inches clearance between the top of the pickup walls and the underside of the front of the trailer for pitch and roll of the trailer. The height of the hitch and the pin box should be adjusted so the trailer is approximately level as it is towed. Doing so could result in vehicle damage, Serious injury, or Death. Unless you use a REESE Sidewinder or Revolution Pin Box. CONVENTIONAL PIN BOX EXTENDED PIN BOX WARNING: Do Not install this fifth wheel hitch on or attempt to tow with a short bed pickup truck that has a bed shorter than 6 ft. It also may be helpful for the 18K version to add an Elite series Slider (Part # 30070) for increased turning clearance for low speed, non-highway maneuvering. but longer than 6 ft.) is to be used for towing, Cequent Performance Products recommends the trailer be equipped with a minimum 13 extended pin box to help gain additional truck -trailer turning clearance (See trailer manufacturer for options) (See below). TRUCK X KING PIN If a short bed pickup (less than 8 ft. RV TRAILER Y Rule of thumb: The distance from the back of the truck cab to the center of the rear truck axle X, should be approximately 4 inches greater than onehalf the trailer width Y. Cequent Performance Products recommends the use of long bed (8ft) light trucks for the best combination in truck -trailer turning clearance. Cequent Performance Products hitches are designed for use in light trucks such as the Ford F-Series, the Chevy Silverado and the Dodge Ram. ![]() ![]() 1 why an extended pin box Trucks come in many different configurations.
0 Comments
Leave a Reply. |